1100-2293
Revision 0
6
MGS-460 Quick Start Guide
STEP 1 | Mount Gas Detector & Remove Lid
WARNING:
DO NOT allow the lid / sensor to hang from the ribbon cable.
Failure to comply may result in damage to the product.
5. Installation
1. Mount the MGS-460 transmitter & remote sensor according to the product
dimensions, maximum wiring lengths and following considerations:
•
Environment:
the full range of environmental conditions when selecting a
location.
•
Application:
the specifics of the application
(possible leaks, air movement / draft,
etc.)
when selecting a location.
•
Accessibility
: the degree of accessibility required for maintenance purposes
when selecting a location.
•
Target Gas:
the specific gravity of the target gas when selecting the height of
the instrument.
2. Using a 5/32″
(4 mm)
hex key / allen wrench
(not included)
remove the lid from the
remote sensor.
3. Set the lid and rubber gasket aside to be reinstalled later.
4. Install cable into remote sensor connection and secure the cable glands.
