Bacchus BCS1000, Installation Manual

Page: 7 / 8

7
Troubleshooting
Alarm conditions on the electronic controller, Call BCS Tech Services at 937-665-0424
Unit will not reach temperature
Call your installation contractor to Determine proper refrigerant
charge. Dirty condenser?
Unit has shut off Call BSC tech services or field Service; could be bad Compressor,
fans, controller or Pump
Alarm Signaling
Message
Cause Outputs
“P1”
Thermostat probe failure compressor and heating outputs off
(on dehumidification system only)
“P3”
Humidity probe failure humidity regulation off
“HA”
High temp alarm outputs unchanged
“LA”
Low temperature alarm outputs unchanged
“HHA”
High humidity alarm outputs unchanged
“HLA”
Low humidity alarm outputs unchanged
In the instance of any of these alarms, call Bacchus Tech Services, or your local service contractor.
Dimensional /Electrical
BCS1000 BCS1000 BCS1500 BCS1500 BCS2000 BCS3000
Cond. Unit Evap. Con. Unit Evaporator Con. Unit Con. Unit
Dims.
17”D x 13.3”W 18”D x 29.25”W 19”D x 16.2”W 18”D x 29.25”W 19”D x 21’W 25” D x 20”W
x 11.8”H x 6.5”H x 14”H x 6.5”H x 16.5”H x 16”H
Weight 51 lbs. 49 lbs. 62 lbs. 51 lbs. 81 lbs. 135 lbs.
Refrigerant
3/8” suc. 3/8”sw 3/8” suc 3/8” sw x 3/8” suc ½” suc
Connection
1/4” dis. ¼” dis ½” sw 5/16” dis 3/8” dis
Water Supply
¼” ¼”
Connection compression compression
Condensate ¼ mpt
¼” mpt
Connection
Compressor 1/2 hp 115v .65 hp 115v 1 hp 115v 1 ½ Hp
HP/voltage 208/230-1v
Electrical
compressor rla 10A 11A 8A 12.1A
compressor lra 53A 51A 43A 49A
cond. Unit MFS 20A 30A 15A 17.6A
cond. Unit mca 13.4A 13.4A 11.3A 12.1A
BTU capacity 40F 4857 6250 10200 (100 amb) 12,185
suc, 110 amb.