WWW.BALTIMOREAIRCOIL.COM
25
Optional Accessory
Installation
Mechanical Access
Platform for Multi-cell Units
Mechanical Access
Platform Side Ladder
Mechanical Access Platform Side Ladder (Optional)
1. Attach the upper ladder supports LA7 to the ladder if not already installed and then
attach the ladder assembly to the platform using the 3/8” x 1 1/4”bolts provided. See
Figure 39
,
Detail B
.
2. Secure the ladder flares to the platform railing posts using the 5/16” x 3 1/3” bolts
provided. See
Figure 39
,
Detail A
.
3. Install the mid and lower ladder supports per
Figure 39, Detail C,
as follows:
–
Secure the standoff channels PDI to the factory installed support channels using the
3/8” x 1 1/4” bolts provided.
–
Secure the standoff channels PDI to the ladder with the ladder clamps PDC using
the 3/8” x 1 1/4” bolts provided.
–
Install the cross brace(s) using the 3/8” x 1 1/4” bolts provided.
NOTE:
Not all units receive
a mid-support.
Figure 39.
Mechanical Access Platform Side Ladder – All units
Detail A
Detail B
LA7
PDC
PDI
Cross Brace
