41
42
Copyright © 2023, Baby Trend, Inc.
Copyright © 2023, Baby Trend, Inc.
5.13 Low Birth Weight Harness
Shortening Routing
1. Remove the head pillow and set aside
(Fig. 41a).
2. Remove the harness loops ends from
the splitter plate and pull harness
through the seat back.
See section (5.10 Page 38).
3. Remove harness cover, chest clip and
buckle tongue on one side and set
aside. Remove the cup holderss and set
aside (Fig. 41b).
4. Pull harness webbing through the seat
insert. Remove the seat insert and set
aside (Fig. 41d).
5. Lift seat fabric from the top and pull
crotch buckle through while removing
the complete seat fabric.
6. Must use crotch buckle in position 1.
Always put crotch buckle and place into
position 1 (Fig. 41c).
7. Pull the crotch buckle anchor through to
position 2 (Fig. 41c).
Shoulder slot height
levels
Numbered Slot
adjustments
Crotch buckle
adjustments
5.13 Low Birth Weight Harness Shortening Routing cont.
8. From top side feed harness loop down though bottom
of seat slot
(1)
.
9. Turn car seat over and feed harness loop end back
through slot
(2)
.
10. Turn car seat upright and feed through harness
slot
(3)
.
11. On opposite side, Turn seat over and feed harness
loop through slot number
(3)
.
12. From top side feed harness loop end down through
slot number
(2)
.
13.Turn seat over and feed harness end up through slot
number
(1)
.
5.0 Installation and Use
5.0 Installation and Use
Fig. 41a
Fig. 41b
Fig. 41c
Fig. 41d
1
2
1
1
2
2
Seat Cut-Away
Anchor Bracket
Buckle
2
1
3
3
