background image

19

20

Copyright © 2023, Baby Trend, Inc.

Copyright © 2023, Baby Trend, Inc.

 4.0 Selecting a Vehicle Seating Location

3. Check again for any active frontal air bags. DO NOT use a location 

that has an active frontal air bag or is adjacent to an Active Air bag 

such that, when deployed, the Active Air bag may come into contact 

with the car seat. Many passenger side frontal air bags are designed 

to deploy to protect the passenger side as well as the center front 

seating position. Please see the active air bag warnings in your 

vehicle owner’s manual to help determine unsafe locations in the 

vehicle.

4. If the front seat position is used, slide the vehicle seat as far to the 

rear as possible to prevent the car seat from striking the dash in a 

crash. If the rear seat position is used, slide the vehicle seat directly 

in front of the car seat forward enough to prevent the car seat from 

striking the vehicle seatback in a crash.

4.7 Preparation for Installation with UAS Lower Anchor Belt

Consult your vehicle owner’s manual or manufacturer for

location and availability of UAS anchor points.

NOT all vehicles have the same locations or maximum weight

requirements for UAS! 

4.8 Top Tether Anchor Locations

Top Tether Locations are indicated by the following symbol:
Top Tether symbol:
UAS

The Universal Anchorage System (UAS) is designed to make

installation of child car seats easier by allowing child restraints to be

installed without using the vehicle’s seat belt system. Since September

1, 2002, at least two rear seating positions of all cars, mini vans, and

light trucks come equipped with lower child restraint anchor points

located between a vehicle’s seat cushion and seat back. These vehicles

are also equipped with at least 3 top tether anchorages located behind

the vehicle seat. Together, the lower anchors and top tether make up 

the UAS. All child restraints manufactured since September 1, 2002

have lower anchor and top tether attachments which will connect to the

vehicle’s UAS. Read your vehicle owner’s manual for exact

locations, identification and requirements for use with a child

restraint. ONLY use UAS to secure your car seat in a seating position

recommended by the vehicle manufacturer for UAS installation. Refer to

the vehicle owner’s manual for the vehicle’s top tether anchor locations.

Vehicle anchorages should be

Ceiling mount

Rear  

Package Shelf

Pick up 

truck

  Vehicle with  

reinforced seats

Floor Mounts

 

 

Lower Anchor

Point Locations

UAS Symbol

UAS Symbol

UAS Symbol

4.0 Selecting a Vehicle Seating Location

identified by one of the

symbols shown to the right.

Consult your vehicle 

owner’s manual for 

your vehicle’s exact 

UAS locations, anchor 

identification and usage 

requirements.

Vehicle Top Tether

locations may vary: 

Summary of Contents for Trooper VC01































Reviews: