MAINTENANCE
22
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ADDITIONAL
21
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
CARE AND CLEANING
Remove the seat pad and headrest
from the frame.
NOTE:
requires reversing
STEP 3
.
Ensure that all buckles on the seat
pad are fastened. Do not iron. Do
not dry clean.
Instructions:
SEAT PAD / HEAD PILLOW:
Machine wash with cold water,
gentle cycle.
No bleach.
Tumble dry, low heat.
TOY BAR AND TOYS:
Wipe clean
with avdamp cloth and mild soap.
Air dry. Do not immerse in water.
FRAME:
Wipe the metal frame with
soft, clean cloth and mild soap.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that may cause undesired
operation.
WARNING:
Changes or modification to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be deter
-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canada ICES-003 Statement
This Class B digital apparatus complies with Industry Canada Standard ICES-003.
Operation is subject to the following two conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that may
cause undesired operation.
