![background image](http://html1.mh-extra.com/html/babymoov/a014422/a014422_instructions-for-use-manual_464040014.webp)
14
YOO CARE •
Instructions for use
TROUBLESHOOTING
Problem
Possible causes
Solutions
No audio or video signal is
transmitted
• Microphone sensitivity is too low
• The battery is run down or the
mains adaptor is not correctly
connected to the transmitter
• Increase microphone sensitivity
using the Baby menu
• Replace the battery or check
connections
Continuous transmission
• Microphone sensitivity is too high
• Microphone sensitivity is set to
No Vox
• Decrease microphone sensitivity
using the Baby menu
• Adjust microphone sensitivity in
Vox mode (voice activated)
Out of range alarm sounds
constantly
• Transmitter battery is run down
• The transmitter and receiver are
out of range
• Connection has been lost or is
incorrect
• Change the batteries or use the
mains adaptor
• Move the receiver closer to the
transmitter
• Reconnect
The image on the screen is still
or blurred
or in black and white
• Range limits have been reached
• Insufficient light in baby’s room,
the transmitter is operating in
nightlight mode using the
infra-red LEDs as light source
• Interference from other devices
is preventing the transmitter from
operating correctly
• Move the receiver closer to the
transmitter
• Increase lighting in baby’s
bedroom
• Restart the transmitter
Battery constantly low
• Battery is run down
• Rechargeable battery is
damaged
• Recharge the battery or use the
mains adaptor
• Change the batteries or used the
mains adaptor (transmitter).
• Replace the rechargeable battery
The receiver’s speaker makes
no noise
• The speaker is in «mute» mode
• Press the icon
(15)
to cancel
«mute» function
Static and interference
• The transmitter is located near
other electric devices
• Move the electric devices away,
or move the transmitter away
from the source of interference,
or change channel
Insufficient range
• Wall between the transmitter and
receiver is too thick
• Transmitter battery is run down
• Move the transmitter and
receiver
• Change the battery or use the
mains adaptor