background image

B825A PROFESSIONAL

CORD/CORDLESS LITHIUM 

CLIPPER

IMPORTANT SAFETY 

INSTRUCTIONS

When using electrical appliances, 
especially when children are present, basic 
safety precautions are required to always 
be followed, including the following:

READ ALL INSTRUCTIONS 

BEFORE USING 

KEEP AWAY FROM WATER

SAFETY CAUTIONS

•  For the purposes of recharging the 

battery, only use the adapter provided 
with this appliance.

• This appliance is not intended for use 

by persons (including children) with 
reduced physical, sensory or mental 
capabilities, or lack of experience and 
knowledge, unless they have been given 
supervision or instruction concerning use 
of the appliance by a person responsible 
for their safety.

•  Keep oil out of reach of children.
•  Children should be supervised to ensure 

that they do not play with the appliance.

•  The battery is not replaceable.
•  This appliance contains batteries that are 

only replaceable by skilled persons.

•  Do not immerse into water 

or other liquids. Do not use 
near basins or other vessels 
containing water.

• Store out of children’s reach.
•  If the supply cord is damaged, it must be 

replaced by a special cord or assembly 

3.   The adapter may become warm while 

charging. This is normal.

4.  

Preserving the batteries: In order to 
maintain the optimum capacity of the 
rechargeable batteries, the clipper 
should be recharged for 3 hours 
approximately every 6 months. 

5.  Make sure the switch is in the OFF 

position when the clipper is not 
operating. 

6.  If the charging light starts to flash rapidly 

(more than 4 flashes per second) then 
the appliance is faulty. If this happens 
then please stop charging and remove 
the adapter from the mains and contact 
an authorized Service Center.

FOR DIRECT PLUG-IN OPERATION

Make sure clipper is off. Connect charging 
jack into the receptacle at the end of clipper 
and plug the adapter into power outlet. 

ON/OFF SWITCH

To operate, simply slide switch to ON 
(marked “”). To stop operation, set to the 
OFF (marked “ ”) position.

MPORTANT:

 

Do not use the clipper in this 

mode for more than 20 minutes.

Cleaning & Maintenance

To maintain correct performance, the 
blades must be regularly cleaned and oiled. 
They are removable for easy cleaning.
•   With  the  clipper facing you, push the 

blade up and away from the clipper to 
remove.

•  Brush away the hair from the blades and 

the interior of the cutting head with the 
cleaning brush.

• It is recommended to oil the blades 

every time that the clipper is used, using 
the oil provided. Never use any other 

available from the manufacturer or its 
service agent.

•  

Return the appliance to the nearest 
service facility for examination, electrical 

   or mechanical adjustment or repair. 
•  Avoid skin contact with moving blade.
•  Always ensure that the voltage to be 

used corresponds to the voltage marked 
on the unit.

•  For additional protection, the installation 

of residual current device (RCD) with a 
rated operating current not exceeding 
30ma is available in the electrical 
circuit supplying the bathroom. Ask your 
installer for advice.

•  

Do not use the appliance if it has 
been dropped or if it shows noticeable 
damage.

•  Do not leave unattended when switched 

on and always allow to cool before 
storing away.

•  Do not use any attachments other than 

those recommended by BabylissPRO.

Keep the appliance dry

 

OPERATING INSTRUCTIONS

1.  Before using the clipper for the first 

time, charge continuously for 3 hours. 
Maximum battery capacity will only 
be reached after 3 charging and 
discharging cycles.

2.  Make sure the switch on the clipper is in 

the OFF position. Connect the charging 
jack into the receptacle on the bottom 
of the clipper. Plug the adapter into any 
electrical outlet (at the voltage listed on 
the label affixed to the adapter). The 
charging indicator will light up blue to 
indicate that the charging has begun. 
Charging is complete after 3 hours.

product: this oil was formulated for high 
speed clippers, it does not evaporate or 
slow down the blades.

•  After cleaning click the blade frame back 

in place.

BATTERY REMOVAL

This clipper contains lithium-ion batteries.
To help protect our environment, the 
lithium-ion batteries should be removed for 
safe disposal at the end of the clipper’s life.
Please take the appliance to a recycling 
center, where the internal rechargeable 
battery should be removed and recycled 
separately.

For more information about recycling of 
electrical and battery operated appliance, 
please contact your local office or your 
household waste disposal service.

VERY IMPORTANT: Blades must be 
cleaned and oiled on a regular basis 
for proper functioning. Failure to 
regularly clean and oil the blades 
will void the warranty.

2

3

Reviews: