BaBylissMEN 7107U, Quick Start Manual

Page: 6 / 12

To remove the comb guide
• Switch the appliance off.
• Push the base of the comb guide upwards until it comes away from
the cutting head.
Jawline Blending Combs:
To attach a jawline blending comb
• The combs come in 3 different length settings,
I = 1.5mm, II = 2.5mm & III = 3.5mm.
• Slide the comb over the trimmer head, pull down
over the rear of the head and click into position.
To remove a jawline blending comb
• Ensure the appliance is switched off.
• To remove the comb guide, lift the rear of the
guide upwards and away from the trimmer head.
TRIMMING
To Trim the Beard:
Using the 5-position comb guide
• Attach the 5-position comb guide and select the required length (3-
15mm).
• If you require more than one cutting length, start with the longest
length first.
• Switch the trimmer on.
• Hold the trimmer with the teeth of the trimmer pointing upwards, yet
flat against the skin.
• Move the trimmer upwards and outward through the hair, against the
direction of hair growth.
• The trimmer will work most efficiently when cutting through hair at
its own speed.
• Never switch the appliance off whilst in the hair.
Note: The Trimmer can be used without the comb guide and will cut
roughly to a length of 1mm.
Using a jawline blending comb
• Attach one of the three blending combs (I = 1.5mm, II = 2.5mm &
III = 3.5mm).