Inserting the Batteries
The trimmer requires 2 x AA batteries. To insert or replace the batteries,
remove the battery compartment cover by firmly pushing down on the
casing. Insert the batteries as indicated on the inside of the battery
compartment. Replace the casing by sliding it back into the main
trimmer unit until it clicks into place. If the appliance remains unused
for a while or if the batteries have run down, remove them from the
appliance.
COMB GUIDES
5-Position Comb Guide:
To attach the comb guide
• Ensure the appliance is switched off.
• Position the grooves on the inner sides of the
comb guide over the corresponding notches on
either side of the cutting head.
• Slide the comb guide downwards over the cutters
until it will go no further.
To adjust the comb guide
• The marking on the handle should be aligned with the desired grade
number indicated on the comb guide.
Grade 1 - 3mm
Grade 2 - 6mm
Grade 3 - 9mm
Grade 4 - 12mm
Grade 5 - 15mm
• Push the rear of the comb guide upwards with your thumb until it
clicks into position, and the marking on the handle is aligned with the
required grade number on the comb guide.
• Use the longest setting at first, until you become familiar with the
adjustment. If you want a shorter cut, you can adjust the comb to
a shorter position and go over the hair again until you achieve the
desired length.
Summary of Contents for 7107U
Page 1: ...Model 7107U PRECISION BEARD TRIMMER...
Page 12: ......