INSTRUCTIONS FOR USE
• Ensure hair is dry and combed through to remove any tangles. Divide
the hair into sections ready for styling.
• Press and hold the ‘ ’ button for 1-2 seconds to turn on and activate
the fan function. The appliance is automatically set to the medium
heat setting (160°C). The medium heat and the cool-air function
indicator lights will flash. The cool-air function will automatically
activate once the selected temperature setting has been reached
and the indicator light remains solid.
• To select a heat setting suitable for your hair type, press the ‘+/-’
button until the desired heat setting is selected. The indicator light
will flash until the selected temperature has been reached.
Please note:
Once the selected temperature has been reached, the
cool-air function will turn on automatically. To turn the cool-air function
off, simply press the ‘ ’ button twice in short succession. To turn the
cool-air function back on again, simply press the ‘ ’ button twice in
short succession.
• Separate a section of hair. The curl result will depend
on the size of the hair section. Smaller sections will
give a tighter curl effect, whilst larger sections will
create a looser curl effect.
• Press and hold the lever nearest the barrel to open
the plates. Take a section of hair and place between
the plates, roughly 2 inches from the roots. (See
Fig. 1). Release the plates by letting go of the lever
so that the hair is held securely between the plates.
• Holding the appliance handle in one hand and the
cool tips in the other, turn the appliance 180° back
on itself so that the hair is wrapped once around the
outside of the appliance. (See Fig. 2).
• Slowly glide the appliance along the length of the
hair from root to tip in a downward motion. (See
Fig. 3).
Fig. 1
Fig. 2
Fig. 3
