Interchangeable Brush Heads
• To attach a brush head, place it over the body of the unit and slide it
down into position.
• Lock the brush head in place by sliding the switch on the top of the
brush to the locked position.
• To remove a brush head, ensure the switch on the top of the brush
head is in the open position.
• Gently slide the brush head up and off the unit to remove.
Volume, Body & shape
1) Start by sectioning the hair and combing through to remove any
tangles.
2) To turn the appliance on, slide the ‘on/off’ switch to the correct heat
setting for your hair.
3) Place the brush underneath the hair section close to the roots and
brush through the section to remove any tangles.
4) For added root lift, hold the brush in place at the root for a few
seconds.
5) Starting at the root, move the brush through the hair section. Towards
the end of the hair section start to rotate the brush away from your
head by pressing and holding the appropriate rotation button, this
will create shape and movement through the lengths of the hair.
6) As you do this, resist the rotation of the brush by pulling the brush
downwards. This will create tension through the section of hair.
IMPORtANt!
It may take several attempts to perfect this technique,
if the brush spins too quickly, simply release the rotation button and
remove from the hair.
7) For maximum volume, place the brush at the end of the hair section
and allow the brush to rotate up the hair section by pressing and
holding the appropriate rotate button. Wind the entire section of hair
around the barrel until you reach the root. Release the rotate button
and then hold the brush in the hair for a few seconds.
8) Slide the switch to the cool setting ‘*’ for a further few seconds, this
cools the hair to create longer lasting volume.
