discontinue use and consult your doctor. Persistent pain could be a symptom of a
more serious condition.
5. Use of this product should be pleasant and comfortable. Should pain or discomfort
result, discontinue use and consult your physician.
HOW TO USE
1. Be sure to consult with client before use. DO NOT USE UNTIL YOU HAVE READ
“IMPORTANT SAFETY INSTRUCTIONS” AND “CAUTION” WARNING.
2. Ensure the massager is charged and in the OFF position (Marked “0”).
3. Make sure massager is in a position where the springs are hanging, and the ON/OFF
switch is facing you.
4. Place massaging hand through both sets of springs fingers first, palm up. Your
fingers should be past the second set of springs and free to move. Your palm should
be exposed with the back of your hand tight to the massager pad.
5. With your free hand turn massager ON to either LOW speed or HIGH speed depending
on the client sensitivity or desired massage strength.
6. Use the precision of your palm and finger tips to massage the back, neck, or face
of client. The massaging pulses will transfer from the massager unit through your
hand to the client.
7. Once massage is complete turn the massager to the OFF position and remove from
hand.
USER MAINTENANCE
1. Your massager is designed for household use, and is virtually maintenance free. No
lubrication is needed. To clean the massager, use a damp cloth with water only. Do
not use any strong chemical cleaners.
2. If the cord or massager is damaged or does not operate properly, return it to an
authorized service center. Any required servicing should be performed by a BaByliss
authorized service center. This appliance has no user serviceable parts.
3. Never allow the power supply cord to be excessively pulled or twisted. Inspect the
cord frequently for damage. Stop use immediately if damage is visible or unit stops
or operates intermittently. Never wrap the cord around the appliance.
DISPOSAL OF LITHIUM ION BATTERY
1. Disconnect the massager from electrical outlet.
2. Discharge the battery completely before beginning disassembly of massager.
3. Remove massager pad by loosening and removing 4 screws.
4. Remove back cover by loosening and removing 4 screws.
5. Remove the 4 screws underneath where the massager cover was located. This
will separate the top cover and bottom cover.
6. Locate and remove the 2 screws in the bracket holding the lithium battery.
7. Disconnect and remove the lithium ion battery.
8. To protect the environment, do not dispose of your battery with your ordinary
household waste. For more details on recovery of material and waste-treatment
facilities, please contact the waste disposal services in your region.
CONTAINS LITHIUM ION BATTERY.
MUST BE COLLECTED, RECYCLED OR
DISPOSED OF PROPERLY. DO NOT DISPOSE
OF IN THE MUNICIPAL WASTE.
FXSSM1/FXSSMG
PRODUCT FEATURES
1. Stainless Steel housing
2. Brushless Motor
3. Dual Offset Massaging Weights
4. Flexible Coil Straps
5. Lithium Ion Battery
6. High/Low Massage Settings
7. Discharge Time:
a. High Setting – 60 Min
b.Low Setting – 75 Min
8. Power Adapter
FXSSM1(MG) IB-15811A.indd 7-8
2020/2/20 1:08 PM
