IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be taken, including the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER –
Any appliance is electrically live, even when the
switch is off. To reduce the risk of death or injury by electric shock:
1. Always turn appliance off immediately after using.
2. Do not place or store appliance where it could fall or be pulled into a tub
or sink.
3. Do not use appliance while bathing or in the shower.
4. Do not place appliance in, or drop into water or other liquids.
5.
If appliance has fallen into water, do not reach for it.
6. Turn appliance off before cleaning.
WARNING –
To reduce the risk of burns, electric shock, fire, or
injury to persons:
1. Never leave appliance on while unattended.
2. Close supervision is required when this appliance is used by, on, or near
children, or persons with limited physical, sensory, or mental capabilities
or invalids.
3. Use appliance only for its intended use as described in this manual. Use
only attachments recommended by the manufacturer.
4.
Never operate the appliance if it has been dropped or damaged, or
dropped into water. Return the appliance to a BaBylissPRO Service
Center for examination and repair.
5. Keep the appliance away from heated surfaces.
6. Never drop or insert any object into any opening on the appliance.
7. Do not place the appliance on any surface while it is operating.
8. Do not use this appliance with a damaged or broken foil or cutter, as injury
to skin may occur.
9. Do not use the appliance outdoors or where aerosol (spray) products are
being used or where oxygen is being administered.
10. Do not crush, or heat above 212° F (100° C) or incinerate the appliance, due
to risk of fire, explosion or burns.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
IMPORTANT
This shaver has been engineered to give you a clean, close, smooth shave. It
requires 2 AA batteries (included). We recommend using longer-lasting alkaline
batteries in your shaver. If you are not going to use your shaver for a long period
of time or if the batteries are dead, remove or replace the batteries from the unit.
1. Remove the metal housing by sliding the bottom switch over and pulling
the cover off.
2. Align the 2 AA batteries with the positive and negative positions indicated
inside the battery compartment. Being careful not to bend the springs,
insert the negative end of each battery first so it will slip easily into place.
3. Return the metal housing by sliding it over the plastic inner housing until it
clicks into place.
4. To use your shaver, push ON/OFF switch upward to the ON (I) position.
5. After you finish using your shaver, push down on the ON/OFF switch to turn
the shaver OFF (O).
6. Remove the batteries if the batteries are no longer functional or if the shaver
is left unused for an extended period of time.
7. Clean the battery contacts and also those of the device prior to battery
installation.
8. Remove used batteries promptly.
FXFS1 IB-15501.indd 3-4
3/21/18 11:54 AM
