background image

Failure to follow these warnings 

and the assembly instructions could

result  in serious injury or death.

READ ALL INSTRUCTIONS BEFORE 

ASSEMBLING CRIB. KEEP THE 

MANUAL FOR FUTURE USE.

WARNING

Parents should ensure a safe 

environment for the child by 

checking regularly, before placing

the child in the product, that every 

component is properly and securely 

in place.

● The product, including side rails, must be fully erected prior to 

   use.

● Strings can cause strangulation! Never place items with a string 

   around a child’s neck such as hood strings or pacifier cords. 

   Never suspend strings over product or attach strings to toys.

● Discontinue use of the product when child is able to climb out 

   or reaches the height of 35in. (90cm).

● Child can become entrapped and die when improvised netting 

   or covers are placed on top of a product. Never add such items 

   to confine child in product.

● When child is able to pull to standing position, set mattress/ 

   base to lowest adjustment position and remove bumper pads, 

   large toys, and other objects that could serve as steps for 

   climbing out.

● Never place product near a window where cords from blinds or 

   drapes can strangle a child.

● Mattress M5323C or M5325BA made by Babyletto must be 

   ordered with this crib. Reference ASTM406-13, Clause 5.16.1

● In gaps between a mattress 

   too small or too thick and 

   product sides

● On soft bedding
NEVER add a mattress, pillow, 

comforter, or padding.

INFANTS CAN SUFFOCATE

WARNING

● Use ONLY mattress/pad provided by manufacturer (which  

   must be at least 53 in. long by 25 in. wide and not more than 

   5 in. thick).

● Check proper fit of mattress. Should be not more than 5 

   inches thick. The maximum gap between mattress and inside 

   of crib border (or edge) should be no more than 1 inch.

● Always provide the supervision necessary for the continued 

   safety of your child. When used for playing, never leave child 

   unattended.

● To reduce the risk of SIDS, pediatricians recommend healthy 

   infants be placed on their back to sleep, unless otherwise 

   advised by your physician.

● Never use this product if there are any loose or missing 

   fasteners, loose joints, broken parts, or torn mesh/fabric. 

  Check before assembly and periodically during use. Contact

   MDB FAMILY for replacement parts and instructional 

  literature if needed.  DO NOT substitute parts.

● Never use plastic shipping bags or other plastic film as 

  mattress covers not sold and intended for that purpose. They 

  can cause suffocation.

● Never use a water mattress with this product.

● If refinishing, use a nontoxic finish specified for children’s 

   products.

Please do NOT remove any wood 

screws in the normal disassembly 

of the crib.

WARNING

WARNING

page 19

Summary of Contents for 13001
























Reviews: