Digital Video Baby Monitor
EN
8
Installation location of the baby unit and parent unit
1. Baby
unit
■
Locate the baby unit A
2
on an even, dry and stable surface in the room where you want to monitor
your child. We recommend an elevated location (e.g. chest of drawers or a shelf) at a suffi cient distance
away from equipment and devices that could cause signal interference.
■
When the baby unit A
2
is to be powered from the grid, locate it within reach of a power socket. In
order to minimise electro-smog, the baby unit A
2
should be located at least 1 m away from your child.
■
Turn the camera panel B
3
so that the camera lens B
3
covers the area that you wish to monitor.
Attention:
Never locate the baby unit A
2
or the power adapter A
3
in the baby's bed or within the reach of
your child.
2. Parent
unit
■
Place the parent unit A
1
in the room where you will be located. When the parent unit A
1
is to be
powered from the grid, locate it within reach of a power socket.
Power source
1. External power source and its use
■
To power the baby and parent units A
2
and A
1
from an external power source, use only the original
power adapters A
3
type JF005WR-0500100VH (output 5 V , 1 A).
■
Insert the plug of one of the power adapters A
3
into the socket B
4
that is located at the side of the
baby unit A
2
. Insert the plug of the power adapter A
3
into a power socket.
■
Insert the plug of the second power adapter A
3
into the socket C
6
that is located at the side of the
parent unit A
1
. Insert the plug of the power adapter A
3
into a power socket.
Attention:
Before connecting the power adapter A
3
to a power socket, make sure the voltage stated on its
rating label corresponds to the voltage in the power socket.
2. Internal power source and its use
■
To power the baby and parent units A
2
and A
1
using an internal power source, use the supplied
rechargeable Li-Ion batteries (3.7 V / 800 mAh / 3.3 Wh).
■
Inserting and removing the battery
–
For safety reasons, the battery compartment cover B
qa
on the baby unit A
2
is secured by
a screw. Remove the screw. Take off the cover. Insert the Li-Ion battery into the compartment
B
qa
so that the contacts point towards the bottom right corner of the compartment B
qa
. Put
the cover back on and secure in place with the screw. To remove the battery from the baby unit
A
2
, proceed in the reverse sequence.