Babybrezza formula pro advanced Instructions Manual Download Page 7

2

3

1

1

2

1

2

Monthly Cleaning

Instructions

Hand wash all parts shown above with warm
soapy water, rinse well and air dry thoroughly. 

Hand wash Water Tank with warm soapy
water, rinse well and air dry thoroughly. 

Easy Daily Cleaning Instructions

Once a month, give your Formula Pro® Advanced a thorough cleaning. 

Remove Funnel and Funnel Cover by pulling
out and down.

PLEASE NOTE: 

You don’t need to remove the

Powder Container or the Powder Container parts
for daily cleaning. 

Wash Funnel and Funnel Cover with hot
soapy water and rinse well.

Air dry completely before re-assembling.

Wipe the Powder-Dispensing Hole on the underside
of the Powder Container and remove any spilled
powder or milk on the machine using a dry paper
towel or soft dry clean cloth.

IMPORTANT

Monthly Descaling Instructions

You can leave the formula powder in the Powder Container during the descaling process.

To prevent mineral scale on the water heater inside your Formula Pro® Advanced, follow these easy steps:

1. Remove the Water Tank, empty it and fill it with 600ml distilled (clear) vinegar and 600ml of sterile or pre-boiled

    cooled water.

2. Place the Water Tank on the Base of the machine and place a cup larger than 300ml under the funnel.

3. Select “300ml” with the “ml” button, then press the “

water only

” button to dispense.

4. Empty the cup, place back under the Funnel, then press the “water only” button again to dispense another 300ml.

5. Now unplug the machine, remove the Water Tank, and empty it.

  Let the machine sit for 4 hours.

6. Wash, rinse and fill the Water Tank to the max line with sterile or pre-boiled cooled water, then place it

     back on the base. 

7. Plug in the machine, place a cup to catch 300ml water and use the “water only” button to run an 300ml cycle.

    Dispose of the water dispensed in the cup and then repeat this step to run the entire tank of water through the

    machine. When the “Low Water” indicator turns on, you’re done rinsing.

8. Refill the Water Tank with sterile or pre-boiled cooled water and return to normal use.  

It is EXTREMELY IMPORTANT to clean the funnel after every 4 bottles made. 

This will keep your Formula Pro® Advanced dispensing accurately.

Always thoroughly wash your hands and any surfaces that will be used before the daily or monthly clean.

To make daily cleaning easier you can buy an extra
Funnel and Funnel Cover from

cheekyrascals.co.uk/funnel

.

 

You'll have one in use

and one in the wash.

Replace the water in the water container daily to 
keep it fresh. 

Tip:

 To avoid waste and help you 

remember, only fill the water container with what 
you think you will need each day.

Set-up and cleaning videos available at

babybrezza.com/video

12

11

Summary of Contents for formula pro advanced









Reviews: