F) Prepare your first bottle
The Formula Pro® Advanced will dispense
powder and water together, then stop
automatically when dispensing is complete.
Press the “start” button to dispense formula.
Check for clumps and shake or stir the bottle
if necessary. Always check the temperature
before feeding your baby. The milk is for
immediate consumption only, left-over milk
should not be stored.
ml size indicates water volume only.
It does not include the volume of powder
added when mixing.
Go to
babybrezza.com/fpa
to find the correct
setting for your formula powder.
Press the “powder setting” button repeatedly
to select your setting 1 - 10.
Press the “temp” button to select the
temperature of the formula dispensed.
The temperature indicator will flash when
heating and stay solid when the set temperature
is reached. Formula will not be dispensed until
the indicator stops flashing.
= Slightly warmer than body temperature
= Body temperature
= Room temperature
Press the “ml” button repeatedly to select
the volume of water you want to dispense.
In use, the powder will not remain level in the
container. Refill the Powder Container when the
orange arms of the Stirring Wheel become visible.
This is essential for accurate formula measuring.
PLEASE NOTE:
The level will appear higher
than the ml size selected because of added
powder volume and/or variance in
bottle markings.
The Formula Pro® Advanced will revert to the
settings last used after it has been unplugged
or switched off. You do not need to select a powder
setting every time you make a bottle. You can
always change the ml size or powder setting by
pressing the buttons again.
Example: 120ml of water plus powder volume
is approximately 135ml depending on
your formula powder type.
It is essential that you choose the correct setting
for your formula (brand, type, stage and scoop weight).
Make sure your Formula Pro® Advanced is plugged in and turned on.
Some clumping may occur with some formula
powders inherently difficult to mix with water.
If your formula is not listed:
In the UK or Ireland please visit
cheekyrascals.co.uk/contact-us
, in other
countries go to
babybrezza.com/pages/international
to find your local representative.
Set-up and cleaning videos available at
babybrezza.com/video
10
9