1
2
3
4
Carefully pour formula powder into the
Powder Container. Wipe up any spilled
formula powder with a clean cloth.
Make sure that the powder is level and filled to
between the min and max lines on the Powder
Container.
Place the Powder Container Lid on the Powder
Container and turn clockwise until it stops.
This will engage the safety switch and lock
the Powder Container onto the base.
To remove the Powder Container, turn the
lid counter-clockwise.
Fit the Drip Tray on the Base to fit your bottle
height. Adjust it so the mouth of the bottle is
as close to the Funnel as possible.
Push the Drip Tray firmly into the machine
to set it in place.
D) Add the powder and sterile bottle
Water only button:
Press to dispense ml
of water displayed
on the LCD screen.
Temp button:
Press to select your
warming temperature.
LCD Display:
Shows selected functions & warnings
ml button:
Press to select ml of water dispensed.
For Ounces, press & hold for 6-7 seconds
before selecting number of ounces required.
Start button:
Press to start
dispensing
formula.
E) Set up the controls
= Slightly warmer than body temperature
= Body temperature
= Room temperature
Powder Lid Open - The Powder Container Lid is not closed completely or is not on the Powder Container
correctly. Close the Powder Container Lid completely and correctly when this symbol is illuminated.
Low Water - Refill Water Tank when this symbol is illuminated.
Clean Funnel - This symbol will illuminate after every 4 bottles are made. When this symbol is illuminated,
remove Funnel assembly, wash and dry completely, then place it back into the Base. See Page 11 for details.
Funnel Out - Funnel is removed or not inserted completely. Make sure the Funnel is pushed all the way in.
Warning symbols
Temperature indicator symbols
Powder & water settings
Powder Setting Indicator - Use the “powder setting” button to choose your powder setting 1-10.
ml Indicator - Use the “ml” button to chose how many ml of water to mix with powder.
60, 90, 120, 150, 180, 210, 240, 270, 300 ml of water are available. There is no option to make a
30ml bottle. Press and hold the 'ml' button for 6-7 seconds to convert to Ounces and then select the
number of Ounces required. 1 Ounce is equivalent to 30ml, so choose between 2-10 ounces.
The Formula Pro® Advanced will not run if any of these symbols are illuminated on the LCD display.
ml
ml
Power button:
Press to turn
machine on or off.
Press to stop
dispensing.
Powder setting
button:
Press to
select setting number
for your formula
brand and type.
Set-up and cleaning videos available at
babybrezza.com/video
8
7