• Please ensure that your child correctly wears the fitted and adjusted
safety harness at all times with all 5 straps secured.
• Never leave the harness buckled when not fitted to the child in the stroller.
The harness can form loops which may cause a strangulation hazard.
TIP
:
Your
canopy
visor may need a little TLC after shipping. To get it
looking nice and new again simply apply heat from a clothes steamer
or hair dryer to remove any wrinkles (just be careful to scorch the
fabric). This is not covered under warranty.
Finally, insert the belly bar into
the belly bar sockets on the seat
frame. Always give the bar a firm
tug to ensure its secure.
Note: To remove from one side
or both, press the button on the
side you want to release, and
pull the belly bar out.
To attach the canopy, first
secure it to the frame with
the zip starting from the left
side (when facing the seat).
Next attach the plastic
canopy connectors onto the
sides of the frame (
TIP:
attach
from top to bottom). You’ll
notice a round guide on each
side, the connectors should
attach over these guides.
click!
click!
9
3
4
5
