10
11
5. Insert the 4 set screws (Part #1122) into parts A and C into the cross dowels
as shown. Use a Phillips screwdriver to turn the set screws clockwise until
they are secure.
Do not over tighten.
#1116
C
B
A
6. Place the sleeping platform (Part D) so the large holes on the perimeter face
up. Affix each platform block (Part Y) in each of the 4 positions as shown by
placing the wood peg into the hole.
D
Y
7. Secure each of the 4 platform blocks (Part Y) using a screw (Part #1211) and
the supplied Allen wrench as shown. Screws should be hand tight.
Do not overtighten.
#1211
8. Place the frame flat on the ground as shown. Position the sleeping platform
(Part D) so that the 4 platform blocks (Part Y) face the bottom of the babybay
(end with large holes).
D
A
B
C
