8
9
BUILDING YOUR BABYBAY
1. Locate the 3 rail pieces (Parts A, B, C). Position the rails upside down so that
the large holes on the bottom of the rails are facing up.
(the bottom rails will be highlighted throughout these instructions)
C
B
A
2. Screw the 4 threaded dowels (Part #1117) into parts C and B until they
are finger tight. The holes in the dowels should be facing up and down, as
shown, if they are not facing up, slightly unscrew the dowel until it is. (the
threaded dowels may be a little loose)
B
C
#1117
3. Insert the 4 cross dowels (Part #1116) into parts A and B so the hole in the
side of the cross dowel and the hole in the end of the rail are aligned as
shown.
B
A
#1116
4. Connect the rails so the threaded dowels are fully inserted. If the threaded
dowels (Part #1117) do not easily fit in their corresponding holes, make sure
the cross dowels or threaded dowels have not rotated in their holes.
C
B
A
