ASSEMBLY
4
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
WARNING
3
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
WARNING:
Please follow all of these
instructions to ensure the safety of your child. Keep
these instructions for future reference.
WARNING:
Failure to follow these instructions
could result in serious injury or death. Avoid serious
injury from falling or sliding out, always use the safety
harness and insure that the children are properly
positioned according to these instructions.
WARNING:
Never leave children unattended.
WARNING:
Wheel can detach and cause tip over.
Pull on the wheel to assure it is securely attached.
WARNING:
Care must be taken when folding
and unfolding the stroller to prevent finger entrapment.
•
ONLY
approved
SNAP TECH
™
products can be used on the frame.
•
CAUTION:
This single stroller is designed for one child only. Use with more than one child
may cause the unbalance condition which can injure/ harm your child.
• Purses, shopping bags, parcels, diaper bags or accessory items may change the balance
of the stroller and cause a hazardous, unstable condition.
• The maximum weight that can be carried in the storage basket is 5 pounds (2.27kg).
Excessive weight may cause a hazardous unstable condition to exist.
• Be certain the stroller is completely opened and locked in place before allowing a child
near the stroller.
• Use of the stroller with a total weight more than 50lbs (22.67 kg) will cause excessive
wear and stress on the stroller and may cause a hazardous unstable condition to exist.
•
NEVER
use the stroller on stairways or escalators.
•
NEVER
use the stroller with roller skates, in-line skates, skateboards or bicycles.
•
NEVER
allow your stroller to be used as a toy.
• To clean use only mild household soap or detergent and warm water on a sponge
or clean cloth.
• Check your stroller for loose screws, worn parts, torn material or stitching on a regular
basis. Replace or repair parts as needed.
• Discontinue use of stroller should it malfunction or become damaged. Please contact our
customer service department to arrange for repair or obtain replacement parts.
Remove stroller from box. The front and
rear wheels
MUST
be installed prior
to use.
FRONT WHEELS
To attach the front wheels, unfold stroller as
described in the following section:
1)
• Unlock the release lever (Fig. 1a) and
unfold stroller frame by pulling upward
on the stroller handle until the frame
locks (Fig. 1b).
See Handle section if
needed ( Fig. 3)
.
• Lean the stroller backwards and push
each front wheel assembly into the
front wheel housing until they lock into
place (Fig. 1c).
NOTE:
Pull on the wheel
assembly to ensure that it is securely
attached to the stroller.
• Push release button on the side of the
wheel hub and pull wheel assembly from
hub (Fig. 1d).
IMPORTANT!
To ensure safe operation of your stroller, please
follow these instructions carefully. Please keep these instructions for future
reference.
IMPORTANT!
Before assembly and each use, inspect this product for
damaged hardware, loose joints, missing parts or sharp edges. NEVER use if
any parts are missing or broken.
IMPORTANT!
Adult assembly is required.
Fig. 1a
Fig. 1b
Fig. 1c
Fig. 1d
Release Buttons
Snap tech
TS88
