ASSEMBLY
ASSEMBLY
7
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
8
7
8
CUP HOLDER
WARNING:
To avoid
burns, never put hot liquids
in cup holder. Avoid possible
tipping, do not place more
than 1 lb. (0.45kg) in cup
holder.
7)
•
To attach cup holder:
slide the clip on
the cupholder over Cup Holder Tab on
the Handle Bar. Push until firmly in place
(Fig. 7).
CANOPY
8)
•
To open the canopy:
push forward on
the front edge of the canopy while holding
the rear of canopy in place (Fig. 8).
•
To fold the canopy:
pull backwards on
the front edge (Fig. 8).
SEATBACK POSITIONING
9)
•
To recline the seat:
loosen the strap
through the buckle and adjust to the
required recline position (Fig. 9a). To
place the seat back in a more upright
position, press upward on the seat back
with one hand while pulling the strap
through the buckle with the other (Fig. 9b).
NOTE:
The upright position should be
used
only for a child that is at least 6
months old
. Always re-adjust the safety
harness, including the shoulder belts,
when repositioning the seatback.
Fig. 7
Fig. 8
Fig. 9a
Fig. 9b
BUMPER BAR
WARNING:
Do not
use bumper bar to carry
seat with child inside. The
bumper bar is not a carrying
handle.
10)
• Attach the bumper bar by lining up
anchors with the slots on the seat. Push
until it locks into place (Fig. 10a).
NOTE:
The bumper bar must be
securely attached before using this
product.
• To detach bumper bar, press the release
buttons on the bottom of the bar and pull
bar out of the anchor (Fig. 10b).
Fig. 10a
Fig. 10b
