ASSEMBLY
ASSEMBLY
5
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
6
5
6
Remove stroller from box. The front wheel
and rear wheels
MUST
be installed prior
to use.
FRONT WHEEL
To attach the front wheel, unfold stroller as
described in the section following:
1)
• Unlock the release lever (Fig. 1a) and
unfold stroller frame by pulling upward
on the stroller handle until the frame
locks (Fig. 1b).
2)
• Slide the front wheel onto the front fork
(Fig. 2).
IMPORTANT!
To ensure safe operation of your stroller, please
follow these instructions carefully. Please keep these instructions for future
reference.
IMPORTANT!
Before assembly and each use, inspect this product for
damaged hardware, loose joints, missing parts or sharp edges. NEVER use if
any parts are missing or broken.
IMPORTANT!
Adult assembly is required.
Fig. 1b
Fig. 1a
Fig. 2
3)
• Slide the retainer plate onto the front
wheel. Be sure that the raised lip is
pointing toward the fork and insert it
into the slot on the fork. The tab on the
retainer plate must be lined up with the
slot before tightening the wheel (Fig. 3).
4)
• With the wheel in position, tighten the
axel nuts and tighten with standard
crescent, box, or open end wrench. You
should feel significant resistance and
the wheel should be held tightly in place
(Fig. 4).
REAR WHEELS
5)
• Rest the stroller upside down, on the
handle.
• Press the rear wheel posts into the rear
frame hub until it clicks into place (Fig. 5).
NOTE:
Pull on the rear wheel to ensure
that it is securely attached to the stroller.
TIRES
6)
• Tires are shipped un-inflated. The tires
should be inflated on a regular basis to
between 20 to 25 p.s.i. Always use a
bicycle style hand air pump to inflate the
tires *not included
Fig. 3
Retainer Plate
Axel Nut
Axel and Hub
Front Fork
Slot
Fig. 5
Fig. 4
