9
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
10
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
9
WARNING
•
NEVER
place a child under the large bassinet.
• The Playard must be fully assembled and installed before
using.
• The playard, including side rails, must be fully erected prior
to use. Make sure each latch is secure.
•
NEVER
leave the large bassinet in place when child is in
playard.
•
NEVER
place a child under the large bassinet.
• To reduce the risk of SIDS, pediatricians recommend
healthy infants be placed on their back to sleep, unless
otherwise advised by your physician.
• ALWAYS
place child on back to sleep.
•
ALWAYS
provide the supervision necessary for the
continued safety of your child.
NEVER
leave children
unattended.
• If a sheet is used with the mattress/pad, use only the one
provided by Baby Trend
®
or one specifically designed to fit
the dimension of the playard mattress.
• Discontinue use of the large bassinet and the changing
table when child begins to push up on hands and knees or
has reached the height of 25 in. (635 mm), weight of 15 lbs.
(6.8 kgs) or 3 months old, whichever comes first.
• Child can become entrapped and die when improvised
netting or covers are placed on top of a playard. Never add
such items to confine child in playard.
SUFFOCATION HAZARD:
Infant carrier
can roll over on soft surfaces and suffocate child. NEVER
place carrier on beds, sofas, or other soft surfaces.
FALL HAZARD:
Check this accessory regularly
before using it, and do not use it if any part is loose
or missing or if there are any signs of damage. Do not
substitute parts. Contact Baby Trend® Customer Service
at 1-800-328-7363 if replacement parts or additional
instructions are needed.
Fig. 11a
Fig. 11b
Connect
TO ASSEMBLE LARGE BASSINET
ATTENTION:
Playard must be fully assembled and securely locked before
installing or using the bassinet feature. (See To Assemble Playard section, step 1).
You will need to remove the mattress from the bottom of the Playard to use inside
your Bassinet.
11)
• Connect opposing Mattress Support Tubes that are attached to the bottom
of the Bassinet (Fig. 11a).
• Before placing the Mattress into the Bassinet, make sure Mattress Support
tubes are connected (Fig. 11b).
12)
• Position the Bassinet over and down onto
the fully assembled Playard. Secure in
place by pushing down firmly on each
plastic support clip until all are snapped
into place (Fig. 12).
13)
• Place the Mattress into the Bassinet with
the padded side facing upward (Fig. 13).
NOTE:
Fasten tabs underneath the
Mattress secure it in place.
TO REMOVE BASSINET
• Remove Mattress from Bassinet.
Disconnect opposing Mattress Support
Tubes. Unsnap all clips and lift Bassinet.
Fig. 13
Fig. 12
