Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos Los Derechos Reservados.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
WARNING
23
24
AVERTISSEMENT
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos Los Derechos Reservados.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
23
24
ADAPTER
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos Los Derechos Reservados.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Copyright © 2018, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ADAPTER
23
24
UNIVERSAL CAR SEAT ADAPTER
ATTENTION:
The Height Adjustment Bracket must be set at the
lowest postion before placing the adapter and car
seat. Follow the FRAME HEIGHT WARNINGS on
page 19 when using the Adapter for the Car Seat.
27)
• Attach the Infant Car Seat Adapter by lining
up the seat anchors on the side of the seat
with the anchors on the high chair frame.
The rear buckle of the adapter can face
towards either the rear or the front of the
highchair. Push them together until the
anchors lock securely. The buttons should
click into the holes on the seat anchors
(Fig. 27a).
• Place the car seat onto the Universal Car
Seat Adapter. The front of the car seat should
be facing the same direction as the adapter
buckle (Fig 27b).
• Strap the Safety Belts through the Belt Path
on the Car Seat and connect the buckles
together (Fig 27c). Tighten the strap so it
fits snugly and the car seat is secured to the
frame. Tighten the bottom support straps,
located under the car seat adapter bar, by
pulling back on the loop and sliding the
adjuster forward for a snug fit (Fig. 27d).
NOTE:
The Safety Belt must be installed
through the Belt Path before using this
product.
Fig. 27d
Fig. 27a
"Click"
"Click"
Fig. 27b
Fig. 27c
Compatible with most Baby Trend® modular strollers and
joggers (MUV™, Snap Tech, Snap Gear® and Snap Fit™)
and transforms them into infant car seat carriers.
