Baby Trend HC34A, Instruction Manuals

Page: 6 / 22

9
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés. Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
10
OPERATION OPERATION
12) • The shoulder straps of the 5-point
harness have 2 attachment positions.
Select the position that places the
shoulder strap level with, or below, the
top of the child’s shoulder (Fig. 12a).
• Carefully place the child in the seat and
position the safety harness around the
child’s waist and over the shoulders.
Place the crotch strap between the
child’s legs. Insert the male end of each
shoulder/waist belt into the buckle on the
crotch strap. Tighten the harness to be
snug around the child’s waist and over
the child’s shoulders (Fig. 12b).
TO RELEASE SAFETY BELT
13) • Push Button on Center Clasp, the two
Harness Buckles will pop free (Fig. 13).
RECLINE SEAT
14)
• Squeeze recline lever on back of the
seat and adjust to the preferred recline or
upright position (Fig. 14).
Use caution not to trap arms, hands and
fingers when adjusting recline positions.
Fig. 14
Fig. 13
Fig. 12b
Adjust for a snug fit
Center Clasp
TO ADJUST SEAT HEIGHT
WARNING:
Do not adjust
seat height with child in seat.
Adjust seat height before placing
your child in the high chair.
WARNING:
The child
should be secured in the high
chair at all times by the 5-point
restraining system, either in
the reclining, semi-reclining or
upright position.
WARNING:
Never rest
the height adjustment bracket
on the locking pins.
15) • Squeeze the Release Handles on both
sides simultaneously of the Height
Adjustment (Fig. 15a) and adjust to the
ideal position (Fig. 15b).
DO NOT adjust with child in the seat.
ATTENTION:
Make sure the Height Brackets lock on
the lowest position. DO NOT rest Height
Adjustment Brackets on the Locking Pins
(Fig. 15c).
BRAKES
16) • To engage brakes, apply downward
pressure to the brake tabs. Check that
the High Chair will not move and that
brakes are properly applied. To release,
lift up on the brake tabs (Fig. 16).
Fig. 15a
Fig. 15b
Fig. 15c
Release Handle
Highest Position
Lowest Position
Locking Pin
Fig. 16
Fig. 12a