Baby Trend CV88C Page 6 Owner'S Manual Download

Page: 6 / 28

3.0 Convertible Seat Parts

Removable upper

seat back

Harness height

adjustment

release

Harness height

adjustment

release

Top tether

Upper seat

back release

Instruction

holder

Lower anchor

connectors

Lower anchor

connectors

Locking Clip

Storage

Seat Base

4.0 Selecting A Vehicle Seating Location

WARNING!

DEATH or SERIOUS INJURY can occur:

• Only use this Convertible Seat with the vehicle’s lap/shoulder

belts or LATCH System.

• DO NOT use this Convertible Seat with vehicle lap/shoulder belts

mounted to the vehicle door or door frame.

• DO NOT use this Convertible Seat if it cannot be properly

installed. Some child restraints will not fit some vehicle seating

positions.

• NEVER use this Convertible Seat in any vehicle seating position

equipped with an active air bag.

- Read your vehicle’s owner manual to see how to turn off your

airbag if you have no back seat or if a child must ride in the

front seat. For side air bags see Section 4.1.

• DO NOT use this Convertible Seat in the rear seat of a compact

pickup truck. Severe head injury or death can occur.

• DO NOT Use this Convertible Seat in a vehicle with side facing

seats or rear facing vehicle seats. See Section 4.2.

• NEVER attempt to install this Convertible Seat without the upper

seat back installed in forward facing position.

• NEVER use this restraint in a forward facing position with the

removable upper seatback removed.

• NEVER attach two LATCH lower anchors to the same LATCH

attachment point.

• NEVER use both the LATCH lower anchors and the vehicle’s

lap/shoulder belts at the same time.

Summary of Contents for CV88C





























Search results

Summary of Contents for CV88C

Reviews:

Related manuals for CV88C

Brands by name

Popular brands

Baby Trend CV88C, Owner'S Manual

Search results

Summary of Contents for CV88C

Reviews:

Related manuals for CV88C

Brands by name

Popular brands