23
24
Copyright © 2020, Baby Trend, Inc.
Copyright © 2020, Baby Trend, Inc.
5.1.1 Installation Diagrams
Lap belt
Lap/Shoulder belt
Lower anchor (LATCH)
Routing paths for Forward Facing installation
Lap belt with
top tether
Lap/Shoulder belt
with top tether
Latch Lower anchor
with top tether
• Never use a Top Tether connector in a
rear facing installation!!
WARNING!
5.2 Rear Facing Lap/Shoulder Belt Installation
See section 2.1 for requirements
• Weight is 4 - 40 lbs (1.81 - 18.14 kg).
• Height 1” from top of seatback.
1. Extend the flip foot into position and
ensure lock is engaged. To adjust the
angle of the seat lift the recline handle.
Use positions
1
-
3
for Rear facing
(Fig 24a).
Angling the car seat will keep the
baby’s head back and airway open.
2.
Make sure vehicle is parked on level ground then, place the car seat
in a rear seating position and ensure vehicle is level.
1 2
3
4
5
Lap Shoulder belt
Fig. 24a
1 2
3
4
5
1 2
2 3
4
5
Routing paths for Rear Facing installation
5.0 Installation and Use
Internal Harness Mode
5.0
Installation and Use
Internal Harness Mode
