background image

Cosco Designer 22

®

 and Designer 35

®

Please follow the following instructions for proper installation of 

your infant car seat.

Installation of the Cosco

®

 

Designer 22

®

 

and Designer 

35

®

 

Infant Car Seat

1.  Place front seat in the reclined position.  With one hand grasp 

the car seat handle (in its upright, carrying position) and gently 

place the seat, so that the baby faces the rear of the stroller, onto 

the Snap-N-Go attachment system so that the large groove on 

the seat bottom rests on the Snap Bar.

2.  Thread the two ends of the Car Seat Strap (attached to the Snap-

N-Go frame) through the seat belt slots on the sides of the car 

seat, then snap the two buckles together (see Figure 2).  The fi rst 

time you do this, you will need to adjust the length of the strap 

for a tight fi t around the car seat.  

FOR SAFE OPERATION, 

IT IS VERY IMPORTANT THAT THE CAR SEAT STRAP 

IS ALWAYS TIGHTLY FASTENED AROUND THE CAR 

SEAT.

3.  Test for secure installation by moving the car seat in all directions.  

The car seat should be securely attached to the stroller.

Removal of the Cosco

®

 

Designer 22

®

 

and Designer 35

®

 

Infant Car Seat

1.  Unlock the Car Seat Strap and remove both ends from the seat 

belt slots on the side of the car seat.

2.  With one hand, grasp the car seat handle (in its upright, carrying 

position)  and  lift  the  car  seat  upward  from  the  Snap-N-Go 

attachment system.  

Figure 1.

Figure 2.

Snap Bar

Position “I” 

Position “5” 

11

Cosco

®

, Peg Perego

®

, Primo Viaggio

®

, Evenfl o

®

, Cozy Carry

®

, On my Way

®

,

  

Embrace

®

Century

®

, Vante

®

, Graco

®

, Cosco

® 

Arriva

®

 and Snug Ride

®

 are the trademarks of their owners.  

They are not associated with Baby Trend, Inc. and no approval or endorsement is implied.

Summary of Contents for 7311




















Reviews: