Step1 Place the child safety seat on the vehicle’s seat ensuring it is firmly press against the car seat backrest.
Step2 Thread the seat belt through the gap between the base and backrest and fasten the belt into the seat
belt buckle with a noticeable “click”. Make sure that the diagonal belt through two belt guides of the
bottom base and the lap belt through the belt guide of the upper base.Tighten the seat belt by pulling
the diagonal belt upwards. Check the webbing of the seat belt has not become twisted or tangled.
Also check that the belt buckle is correctly positioned.
Step3 Place your child into the child seat. Check the height of the shoulder straps on the correct position and
fasten the buckle.Check that the harness has not become twisted and also check that the cover is not
impeding the movement or fit of the harness in any way .
Group 1 (9-18kg)
STEP.2
STEP.1
STEP.3
Click
Diagonal
belt
Lap belt
FITTING THE CAR SEAT WITH THE 3-POINT LAP & DIAGONAL SEAT BELT
6
According to children’s different height, the headrest can be adjusted up
and down.
Hold the headrest adjuster handle on the back of the headrest and
simultaneously raise or lower the
headrest to the desired height.
The shoulder supports automatically move with the headrest in the
desired direction.
Make sure the headrest are at the correct suitable height for your child.
Check that the headrest is firmly locked in place by gently pressing down
on it.
Group 2, 3 (15 - 36 kg)
7
REMOVING THE SAFETY HARNESS SHOULDER STRAPS
4
3
1
2
REMOVING ALL STRAPS
Step1 Press the position adjustment button, meanwhile pull the positioning handle under the front of the
seat up wards, and then pull or push the seat forwards or backwards. Adjust the child seat to the
position 4.
Step2 Press the harness adjuster lever and release the harness adjuster strap.
Step3 Pull out the connecting shaft which connect the base and backrest together.
Step4 Slide both of the harness straps off the harness connector at the back of the backrest and pull the
webbing through the slots in the seat’s backrest and fabric cover.
Step5 Pull the straps through the shoulder strap slots from the front of the child seat. Now you can remove
the shoulder straps and chest pad.
ADJUST THE HEADREST HEIGHT
ADJUST THE HEADREST HEIGHT
This child seat has four recline positions, position1 to 4. You can choose a suitable position to make your child
more comfortable.
Clic
k
