THE CAR SEAT SHOULD NOT BE FITTED IN A PASSENGER SEAT OF A CAR THAT HAS AN AIR BAG FITTED. (SRS)
Your child seat can only be installed forward facing using
a three-point lap and diagonal seat belt in the front or rear
passenge
r
seats of the car.
DIAGONAL BELT
LAP BELT
WARNING
THE TYPE OF APPROVED SEAT BELT YOU MUST HAVE
Always check that the shoulder straps are at the correct height for your child. The
child’s shoulders should always be below the slot for the harness.
YES-Correct
NO-Too high
NO-Too low
CORRECT SHOULDER STRAP HEIGHT
4
Step1 Slot the two metal sections of the buckle connectors together.
Pull the shoulder straps upwards to remove the slack from
the lap sections of the harness then pull the adjuster strap
until the harness is fully tightened.
The harness is slackened by pressing the adjuster
(under the adjuster cover) on the front of the seat.
Press down the adjuster as you grip the two shoulder straps
with your another hand. Pull the shoulder straps towards you
to loosen the harness.
The harness should be adjusted as tightly as possible without
causing discomfort to your child.
Aloose harness can be dangerous.
Check the harness adjuster and tighten each time the child is
placed in the seat.
Step2 Slot the two buckle connectors into the slot in the top of the buckle until they “click” into place.
Step3 Always check the harness is correctly locked by pulling the shoulder straps upwards.
To release the harness, press the red button on the buckle downwards.
STEP.1
STEP.2
STEP.3
FASTENING THE SAFETY SEAT BUCKLE
FASTENING THE SAFETY SEAT BUCKLE
SLACKENING THE HARNESS
5
