Baby Lock Victory BLS3 Page 47 Instruction And Reference Manual Download

Page: 47 / 56

Specialty Thread Guide Chart (Cont.)

Clear Nylon

Monofilament

Machine Embroidery

Threads: Rayon and

Polyester, 30, 40, 50

weight.

Lingerie Thread

Designer 6

Pearl Crown Rayon

Candlelight

Jeans Stitch

Ribbon Thread

APPLICATION

Techniques

requiring the thread

to be invisible such as

blind hemming

Lingerie and

lightweight fabrics,

edging of fine fabrics,

delicate rolled hems.

Decorative edging,

flatlocking, rolled hem,

etc.

4-Thread Seaming

Not recommended

Lingerie thread for

seams.

Not recommended

for seaming

3-Thread Seaming

Blind hemming

Lingerie thread for

seams.

Not recommended

for seaming

2-Thread Flatlock

Blind hemming

Lingerie thread for

seams.

Use in the lower looper

4-Thread Edging

Not recommended

Machine embroidery

thread only.

Use in the upper and

lower loopers.

3-Thread Edging

Not recommended

Machine embroidery

thread only.

Use in the upper and

lower loopers.

3-Thread

Rolled Edge

Lengthen stitch slightly

Machine embroidery

thread in upper

looper

Use in the upper looper

only

(Excluding Ribbon Thread)

Blanket Stitch

Not recommended

Use in the needle only

with a size 90

Top Stitch needle

(Excluding Ribbon Thread)

Ladder Stitch

Not recommended

Use in the needle only

with a size 90

Top Stitch needle

(Excluding Ribbon Thread)

COMMENTS

Make sure to use a

soft pliable monofila-

ment thread

Sew at a slower

speed.

Use thread nets to

prevent the thread

from falling off the

spool and getting

tangled.

Be sure to check the

recommendations

above for best results.

Sew test before

applying to the project.

Summary of Contents for Victory BLS3

























































Search results

Summary of Contents for Victory BLS3

Reviews:

Related manuals for Victory BLS3

Brands by name

Popular brands

Baby Lock Victory BLS3, Instruction And Reference Manual

Search results

Summary of Contents for Victory BLS3

Reviews:

Related manuals for Victory BLS3

Brands by name

Popular brands