"IMPORTANT SAFETY INSTRUCTIONS"
When using overlock machine, basic safety precautions should always be followed,
including the following.
Read all instructions before using this overlock machine.
DANGER-
To reduce the risk of electric shock.
1. The overlock machine should never be left unattended when plugged in. Always unplug this overlock
machine from the electrical outlet immediately after using and before cleaning.
WARNING-
To reduce the risk of burns, fire, electric shock, or injury to persons.
1. Do not allow to be used as a toy. Close attention is necessary when the sewing machine is used by
or near children.
2. Use this overlock machine only for its intended use as described in this manual. Use only attachments
recommended by the manufacturer as contained in this manual.
3. Never operate this overlock machine if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or dropped into water. Return the overlock machine to the nearest
authorized dealer or service center for examination, repair, electrical or mechanical adjustment.
4. Never operate the overlock machine with any air openings blocked. Keep ventilation openings of the
overlock machine and foot controller free from the accumulation of lint, dust, and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn the main switch to the symbol "O" position which represents off, then remove plug
from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the overlock machine
needle.
11. Always use the proper needle plate. The wrong needle plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle(s) causing it to break.
14. Switch the overlock machine to the symbol "O" position when making any adjustments in the needle
area, such as threading needle, changing needle, threading looper, or changing presser foot, and the
like.
15. Always unplug the overlock machine from the electrical outlet when removing covers, lubricating, or
when making any of the user servicing adjustments mentioned in the instruction manual.
16. Keep fingers away from moving parts, especially the area near the blades.
17. Please note that on disposal, this product must be safely recycled in accordance
with relevant National legislation relating to electrical / electronic products. If in
doubt please contact your retailer for guidance.
18. The appliance is not intended for use by young children or infirm persons without
supervision.
19. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
20. - Moving Parts- To reduce risk of injury, switch off before servicing.
CLOSE COVER BEFORE OPERATING MACHINE
21. Do not allow the power cable and controller cable to be scarred, damaged, modified, excessively bent,
pulled, twisted, or bundled. If heavy objects are placed on the power cable or it is subjected to heat,
it may be damaged, possibly causing fire or electrical shock.
"SAVE THESE INSTRUCTIONS"
"This overlock machine is intended for household use."
Summary of Contents for Triumph BLETS8
Page 1: ......
