![background image](http://html1.mh-extra.com/html/baby-lock/triumph-blets8/triumph-blets8_service-manual_462519014.webp)
12
Screw A
Screw
B
Screw
C
Screw
D
1
2
3
6
4
5
14-2. ADJUSTMENT OF MOVEMENT OF PIPES
NOTE: In case that adjusting JET AIR THREADING, do not lay down
the machine body on the side.
a
) In case that the joint pipes do not move smoothly.
UPPER LOOPER or LOWER LOOPER
Loosen the screw "A" and "B" , and adjust the position of looper thread take-up guide 1 and
overlock looper threading pipe holder set 2 , so that joint pipes 3 may move smothly.
CHAIN LOOPER
Loosen the screw "C" and "D" , and adjust the position of threading pipe guide 4 and
chain looper threading pipe holder set 5 , so that joint pipe 6 may move smothly.
- In case that you cannot adjust it properly, replace the upper, lower or chain looper threading
pipes with new ones and re-adjust it so that joint pipes may move smoothly.