background image

Embroidery

5

• 75 built-in embroidery patterns have been

added. For details, refer to the Embroidery
Design Guide.

Addition of 272 mm x 272 mm 
Frame

The machine has been upgraded to be compatible 
with the embroidery frame H 272 mm × W 
272 mm (H 10-5/8 inches × W 10-5/8 inches).

For details on how to insert the fabric into the 
embroidery frame, refer to “Inserting Fabric into 
Embroidery Frame (408mm × 272 mm (approx. 
16 inches × 10-5/8 inches))” in the machine's 
Instruction and Reference Guide (Embroidery).

Embroidering Couching Patterns

40 couching patterns for embroidering have been 
added. For details, refer to the Embroidery Design 
Guide.
Couching patterns can be embroidered using yarn.

Preparing for Embroidery Couching

a

Turn off the machine.

Attach the embroidery unit.

b

Install a bobbin wound with embroidery
bobbin thread.

c

Turn on the machine.

d

Press .

e

Select

, and then select the desired 

pattern from the category.
And then press 

.

f

Press

 to lock all keys and buttons, and 

then raise the presser foot lever.

g

Attach embroidery couching foot “Y”.

h

Rotate the handwheel and check that the
needle is in the left half of the hole in 
embroidery couching foot “Y”.

If the needle is not in the left half, use the multi-
purpose screwdriver to turn the screw of embroidery 
couching foot “Y” to adjust the position of the 
embroidery foot. Turn the screw toward you to move 
the embroidery foot to the right. Turn the screw toward 
the back to move the embroidery foot to the left.
After making adjustments, rotate the handwheel and 
check that the needle does not touch the presser foot.

Embroidery

 CAUTION

• When using yarn, we recommend selecting

yarn of weight 4 (MEDIUM 

). Medium

yarn is often referred to as worsted weight, 20
knitted stitches per 10cm, or 9-11 wraps per
inch. The diameter of the yarn is
approximately 2-3 mm (1/12-1/8 inch). If the
yarn is extremely thin or thick, has an unusual
shape (flat or furry), or more than 2 yarns, the
best finishing results may not be achieved, or
injuries or damage may result.

Note

• Before embroidering your project, do trial

embroidery on a scrap piece of fabric that is
the same as that used in your project.

 CAUTION

• When using embroidery couching foot “Y”,

 

make sure the machine is in embroidery

 

mode. Otherwise, the needle will strike the

 

embroidery couching foot, causing the needle

 

to break and possibly causing injury.

Summary of Contents for Solaris BLSAU


















Reviews: