18
Selection Type Function
Quilt Mode
Manual Mode:
Allows the user to manually operate the machine at a selected needle speed by
setting the preferred speed percentage (for example, 15% is very slow, 80%-100% is very fast).
Regulated:
(See Baby Lock Jewel Stitch Regulator Setup on page 20 for more information).
Allows the user to select a specified stitch length and the machine regulates the motor speed.
The machine will maintain an appropriate motor speed for the selected stitch length if the user
moves the machine in a consistent manner.
Note:
As with any Stitch Regulator, it is possible to “outstitch” the regulator by moving the ma-
chine too quickly. The machine has a top speed of 1500 stitches per minute. If you try to move
the machine faster than 100% of its top speed, you will have irregular stitches. Radical move-
ments and stitching too slowly can also cause problems. Practice to establish a smooth rhythm
with your stitching and allow the machine to work with you.
Stitch/In: (Stitches per inch.):
Allows the user to determine the stitch length desired. Can be set
from 4-15 stitches per inch.
Select:
Press to accept user selection and return to the main menu.
Needle Up/Down
Programs the needle to automatically return to the up or down position when stopped.
Press
Select
to toggle between Needle Up and Needle Down.
Stitch Half/Full
Programs the needle to take a half or full stitch when
Needle Up/Down
button is pressed. Press Select to toggle between Stitch Half and Stitch Full.
Display Menus
The Baby Lock Jewel has a settings menu
display on the front (
Photo 16
) and rear
mount handles as well. Settings may be
changed at either of these locations.
Use the Up or Down arrows and then
press “
Select
” to access a submenu or to
change a selection:
Using the Displays
on the Handles
Photo 16
