Baby Lock Ellure (BLR), Instruction And Reference Manual

Page: 133 / 179

Attaching the Embroidery Foot 131
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
e
Loosen the presser foot holder screw and
remove the presser foot holder.
Turn the screwdriver toward the back.
a Screwdriver
b Presser foot holder
c Presser foot holder screw
f
Hold the embroidery foot with your right
hand, as shown.
Hold the embroidery foot with your index
finger wrapped around the lever at the back of
the foot.
a Lever
g
While pressing in the lever with your finger, fit
the embroidery foot bar over the needle clamp
screw to attach the embroidery foot to the
presser foot bar.
a Embroidery foot bar
b Needle clamp screw
h
Secure the embroidery foot with the presser
foot holder screw.
Set the embroidery foot perpendicular.
i
Tighten the presser foot holder screw.
Turn the screwdriver toward the front.
CAUTION
a
b
c
a
a
b
●
Do not hit the needle with your finger or
the embroidery foot "Q" when attaching
it. The needle may break or cause injury.
●
Be sure to tighten the screw with the
included screwdriver. If the screw is
loose, the needle may hit the presser foot
and break or bend.
●
Before sewing, always turn the handwheel
toward you (counterclockwise) slowly to
make sure that the needle does not hit the
presser foot. Otherwise, the needle may
break or bend.