![background image](http://html1.mh-extra.com/html/baby-lock/crafters-choice-blcc2/crafters-choice-blcc2_instruction-and-reference-manual_3279499038.webp)
36
GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Note
●
When sewing with the walking foot, sew at
a speed between slow and medium.
■
Removing the walking foot
1
Press
(“Needle Position” button) once
or twice to raise the needle.
1
“Needle Position” button
X
The needle is raised.
2
Turn off the sewing machine.
3
Raise the presser foot lever.
1
Presser foot lever
X
The presser foot is raised.
4
With a screwdriver, loosen the presser foot
holder screw, and then remove the walking
foot.
1
Presser foot holder screw
5
Attach the presser foot holder.
• For details, refer to “Removing the presser
foot holder” (page 35).
Memo
●
Only the straight stitch (with reinforcement
stitching) and the zigzag stitch can be used
with the walking foot. For details on the
stitches, refer to “Stitch Settings” (page 94).
Note
●
The optional walking foot is available
through your Baby Lock retailer.
●
Be sure to securely tighten the screw
with the screwdriver, otherwise the
needle may touch the presser foot,
causing it to bend or break.
●
Before starting to sew, slowly turn the
handwheel toward you (counterclockwise)
and check that the needle does not touch
the presser foot. If the needle hits the
presser foot, the needle may bend or break.
CAUTION
1
a
a
Summary of Contents for Crafter's Choice BLCC2
