Baby Lock accomplish 2, Instruction And Reference Manual

Page: 26 / 60

24
Free-Motion Quilting Foot
Reduce the foot pressure (page 9)
and turn the feed dog adjustment knob
(page 10) on the machine lowering
the feed dog for free-motion quilting.
Note
• If the foot is frequently used, be
sure to apply a small amount of
oil about once a month to the
area indicated by the arrows. (If
too much oil is applied, wipe off
the excess with a cloth.)
• For best results when using metallic
or monofilament threads for free-
motion quilting, sew with a good
quality thread, set upper tension
1-2, and use a metallic needle.
• First pull up the bobbin thread,
if necessary.
Seam Guide
1
Tighten the screw securely
with a screwdriver since it
might otherwise loosen due to
vibration.
1
Turn adjustment screws as arrow
images suggest to set the position of
the Seam Guide.
Installation
Adjustment
Pulling Up the Bobbin Thread
While lightly holding the end of the upper thread, slowly turn the handwheel
toward you (counterclockwise) by hand to lower and then raise the needle.
Carefully pull the upper thread upward to pull out the end of the bobbin thread.