12
2
1
3
4
5679<A
1
2
Spool Cap
✽
1
✽
2
Spool Cone Holder
Spool of Thread
Winding/Installing the Bobbin
Bobbin Winding
1
Raise the thread guide bar all the way.
2
Mount a spool of thread on the spool pin.
✽
1 Use spool cap when using parallel-wound thread.
✽
2 Use spool cone holder to stabilize cone shaped spools of thread.
3
Pass the thread through the
triangular hole.
4
Pass thread through bobbin
winding thread guide as shown
in drawing.
5
Run thread through top thread
notch 1, and turning the bobbin
align bottom thread notch 2 of the
bobbin with guide pin on bobbin
winder shaft.
6
Press bobbin winding clutch up against
empty bobbin. If the bobbin stop does
not slide easily between the top and
bottom of the bobbin, check that the
bobbin is seated properly with the guide
pin (
5
) inserted into the lower notch.
Bobbin
Bobbin Winder
Shaft
Guide Pin
Thread Notch 1
Thread Notch 2
Bobbin Winding Clutch
3
5
-
A
: See the following illustrations.
Note
Do not move bobbin winding clutch
while machine is running.
Summary of Contents for accomplish 2
