Baby Lock accomplish 2, Instruction And Reference Manual

Page: 15 / 60

13
9
Stop winding process when bobbin
is full. Remove your foot from the
foot controller.
0
Manually move bobbin winding
clutch back to original position.
7
While holding the end of the thread,
press on the foot controller for a
few seconds. Once enough thread
has wound itself around the bobbin
to hold itself in place, release the
foot controller and trim the excess
thread.
A
Cut thread and remove bobbin.
8
Start winding the bobbin again
by pressing down on the foot
controller.
✽
Place the thread end so that it does
not protrude from the bobbin.
Bobbin Winding Clutch
Pedal
Press down
Foot controller
✽
Pressing down on the foot controller
harder increases the winding speed.