3
IMPORTANT -
Read these instructions carefully
before use and keep them for future reference.
Your child’s safety may be affected if you do not
follow these instructions.
1
Insert the right Adapter Bracket into the right
mounting bracket slot until it clicks into place.
The plastic cover will swing open as you
push. Repeat on left side.
NOTE:
The Left Adapter is notched, while the
right Adapter is not. Left and right
are determined by standing in front of and
facing the stroller.
2
Align mounting brackets on the second seat
with the top of the Adapter Brackets.
3
Insert seat onto Adapter Brackets until it clicks
into place.
To remove City Select® LUX Second Seat:
4
Remove child from seat. Press grey buttons on
seat mounting brackets and pull up until the
seat detaches.
5
Press silver button on right Adapter Bracket and
pull upwards. Repeat on left side.
When Rear Facing:
NOTE:
Your City Select® LUX Second Seat
Kit can also be used facing the rear of the
stroller.
6
To adjust the footwell: Press both buttons
on the side of the footwell and pull footwell
upwards.
FOLDING
• Remove your child from the seat.
• The stroller may be folded with or
without the seat attached, and forward-
facing or rear-facing.
• When folding rear-facing, it is
recommended that the seat be reclined
all the way before folding.
WARNING: To avoid injury, ensure that
your child is kept away when unfolding
and folding this product
.
7
Pull up on the seats footwell and fold
the seat upwards.
8
Pull up on the quick fold handles and let the
frame collapse. Make sure the storage lock
lever clicks into place.
• The stroller should be carried by holding the
frame in a secure and balanced position to
avoid any potential injuries from falls.
ASSEMBLY INSTRUCTIONS
FOLLOW ALL THE INSTRUCTIONS AND
WARNINGS IN THE CITY SELECT® LUX
INSTRUCTION MANUAL.
•
WARNING:
This seat unit is not suitable for
children under 6 months.
•
WARNING:
This stroller is intended for a child 6
months up to 45lb / 20kg.
• Total weight load recommended for this seat is
45 lb (20 kg), and 2.2 lb (1 kg) in the seat back
pocket.
•
WARNING:
Excessive weight may cause a
hazardous unstable condition to exist.
•
WARNING:
Remove second seat adapter
brackets when not in use.
•
WARNING:
Always remove child from seat
before removing seat from frame.
•
WARNING:
DO NOT use stroller with only the
second seat attached in either the forward facing
or rear facing positions.
•
WARNING:
Never leave the child unattended.
•
WARNING:
Always use the restraint system
•
WARNING:
Ensure that all the locking devices
are engaged before use.
•
WARNING:
To avoid injury ensure that the child
is kept away when unfolding and
folding this product.
•
WARNING:
Do not let the child play with this
product
•
WARNING:
Check that the pram body or seat
unit or car seat attachment devices
are correctly engaged before use
•
WARNING:
This product is not suitable for
running or skating
•
WARNING:
Parcels or accessory items, or both,
placed on the unit may cause the unit to become
unstable.
•
WARNING:
Avoid serious injury from falling or
sliding out. Always properly adjust and fasten
safety harness.
•
WARNING:
Never leave the harness buckled
when not fitted to a child. The harness can form
loops that pose a strangulation hazard to the
child.
•
WARNING:
The stroller is designed for flat or
gently sloping surfaces and may become
unstable on higher sloping and uneven surfaces.
Care should be taken by the parent to prevent
the stroller from tipping over.
WARNING:
EN
Summary of Contents for PD349779C
Page 2: ...2 CLICK 1 2 3 6 4 5 L R CLICK 7 8 ...
Page 7: ...7 ...