Baby Jogger City Sway, Assembly Instructions Manual

Page: 14 / 28

14
27 Remove infant body support
REPLACING INFANT BODY
SUPPORT
28 Pull crotch buckle through the
infant body support.
29 Slide the buckle cover over the
crotch buckle.
30 Pull the waist clips through the
infant body support.
31 Pull shoulder harness through
the infant body support.
REMOVING SEAT PAD
32 Pull the harness out of the seat
fabric.
33 Unsnap two snaps on the base of
the seat.
34 Unsnap the two snaps under the
leg support.
35 Pull the fabric off of the leg
support.
36 Pull the flap from the base
through the opening on the leg
support.
37 Pull the seat fabric off of the
frame and slide the fabric out of
the channels.
REPLACING SEAT PAD
38 Make sure the shoulder harness
straps are above the frame.
39 Slide the seat fabric into the
channels of the seat frame on
both sides of the seat. Make sure
that the left and right seat fabric
are routed properly into the
channel.
40 Pull the seat fabric over the back
of the frame
41 Pull seat pad down and onto the
frame.
42 Push the flap from the base of
the seat pad through the opening
on the leg support.
43 Pull the leg support fabric onto
the leg support.
44 Snap the two snaps under the leg
support.
45 Snap two snaps on the base of
the seat pad.
46 Pull the leg support fabric around
the corners of the vibration unit.
47 Push the shoulder harness straps
through the back of the seat pad
and pull through the front.
48 Snap the two snaps on the back
of the seat pad.
EN