Baby Jogger city select LUX, Assembly Instructions Manual

Page: 10 / 20

10
FRAME
1 Unpack the stroller frame from the box
and set the wheels aside . Unlock the
stroller by pulling the
Storage Lock Lever .
2 Lift the Handlebar away from the lower
frame . The stroller will click into place .
3 Place the stroller in the upright position .
WARNING: Ensure that all the locking
devices are engaged before use .
FRONT WHEEL
4 Installation
• Lay stroller on its back so the
Handlebar is resting on the floor .
• Attach the Front Wheel by sliding it
into the front wheel mount until it
clicks . Gently pull on the Front Wheel
to make sure it is properly attached .
5 Removal
• While pressing the front wheel release
button, gently slide the Front Wheel
out of the front wheel mount .
SWIVEL FEATURE
6 Press the Swivel Lock button down
and slide the Swivel Lock to the left to
lock the front wheel assembly in a fixed
position for long distance strolling .
7 Press the Swivel Lock button down
and slide the Swivel Lock to the right
to allow the front wheel assembly to
swivel .
WARNING: When loading and
unloading child, lock the front wheel in
a fixed position . Although the
front wheel of your stroller locks, it is
not intended for jogging or exercise
purposes .
REAR WHEELS
8 Installation
• Align the Rear Wheel axle with the
wheel mount on the stroller frame
and insert it into the wheel mount
until it clicks into place .
• Gently pull on the Rear Wheel to
make sure it is properly attached .
9 Removal
• While pressing the Wheel Release
Button, gently slide the Rear Wheel
out of the wheel mount .
BRAKE
10 To engage quick brake squeeze on the
brake lever
.
11 To Lock the Brakes: gently push the
Brake Lever forward until it clicks into
place .
12 To Release the Brakes: Pull the Parking
brake lock towards you
.
WARNING: Lock the brakes before
loading and unloading your child and
whenever the stroller is not moving .
SEAT - UNFOLD THE SEAT
13 Holding the footwell and the top of the
seat, open the seat .
14 The seat will lock into its open position .
CANOPY
15 Attach the canopy to the frame: Attach
the Canopy’s brackets to the sides of
the seat frame .
16 Attach the 2 fastening strips on the
canopy to the top of the seat .
ADJUSTING SAFETY HARNESS
17 From the back of the seat, undo the
fastening strip and open the pocket to
locate the plastic square stopper . Turn
stopper and pass through the openings
in the PE board and seat fabric .
18 Reinsert stopper at seat opening closest
to child’s shoulders . Pass back through
seat fabric and PE board . Tug on strap
to ensure stopper is locked
.
Repeat on
both sides .
WARNING: Avoid serious injury from
falling or sliding out . Always properly
adjust and fasten safety harness .
WARNING: Always use the crotch strap
in combination with the shoulder straps
and waist belt .
19 Slide the Harness Pads up to access
plastic guide on strap .
20 Hold the plastic guide and pull strap to
tighten or loosen .
EN