Baby Jogger CITY GO PD348959F, Instructions Manual, Page: 31 / 96

31
Place carrier on an approved vehicle seat
location .
1 Place the car seat rear-facing on the
vehicle seat . Route the vehicle belt
through the belt guides on both sides of
carrier . Make sure the belt lies flat and is
not twisted . Fasten the buckle .
2 Check the red line level on the side of
the shell to make sure it is level to the
ground .
3 Push down in center of carrier and pull
the free end of the lap belt to tighten
carrier against the vehicle .
SEAT INSTALLATION - LAP BELT ONLY
1
3
2