Baby Jogger CITY GO PD348959F, Instructions Manual, Page: 27 / 96

27
BASE INSTALLATION - LAP/SHOULDER BELT
7 Place child restraint into the base . Push
down on the front of the child restraint
and handle, you will hear a click . Test to
make sure it is attached by pulling up on
the front corners of the child restraint .
8 Check the level indicator .
No te: If the foot is in the most raised position
and the bubble is out of the zone of your
childs weight you can place a tightly
rolled towel or pool noodle under the
front end of the base to achieve the
proper recline .
9 To remove the base, unlock the lock off
and unbuckle the seat belt and remove .
7
CLICK
8
9