36
Attachment
Bolt
Spacers
(if required)
Anchor
Fitting
Vehicle Metal
Structure
Vehicle Trim
FRONT OF VEHICLE
Lock Washer
Nut
Reinforcing
Washer
If the car is not fitted with a child
restraint upper anchorage point:
For sedans only - drill a 9 mm hole
in the parcel shelf on the centre line
of the seating position as shown on
page 34.
Install the anchor bolt as shown
opposite.
It is recommended that this
installation be carried out by a child
restraint fitting station or licenced
motor mechanic
For vehicles other than sedans - In
Australia, consult your nearest child
restraint fitting station or traffic
authority for vehicle inspection to
find the best, correct position for the
placement of the upper anchorage
point, and for the correct attachment
bolt length and use of spacers.
In New Zealand, consult the agent
for the vehicle.
In some vehicles without a fixed parcel shelf an extension tether
strap may be required. These are available in several different
lengths and can be obtained from child restraint retail outlets.
Tether Anchorage Installation