27
Installation - Vehicle Belts
TO RELEASE:
1. Release the connectors from the
vehicle seat by pushing in the red
release buttons and pulling the
connectors back.
2. the ISOFIX connector assembly under
the base by
reattaching it to the steel rod at the
back of the base.
IMPORTANT
Always secure the base even when
the restraint is not fitted to it. An
unsecured base may be dangerous in
an accident or sudden stop.
PRESS
1
2
IMPORTANT
On some vehicle seats it may not be
possible to get the correct recline angle
even with the recline foot fully out.
In that case pack under the recline foot
with a firmly rolled towel or similar.
Base Installation - ISOFIX Compatible Connectors
